Battery Cable Crimper & 220PCS Cable Lugs Kit

Use this kit to assemble or repair compatible battery cables, inverter leads, vehicle power cables, marine wiring, and other high-current copper-cable connections. It is intended for the listed cable and lug sizes. Do not use a lug barrel, stud hole, or crimp position that does not match the conductor and connection point.

First match the cable gauge to an included AWG 8, 6, 4, 2, or 1 lug. Then select the required stud-hole size and choose either the pickled-copper or tinned-copper variant for the installation environment. The crimper image lists positions from AWG 8 to 1/0, but the included 220PCS lug assortment is listed as AWG 8 through 1.

1. Disconnect all power and cut the cable squarely with the included cutter.
2. Strip insulation to the lug-barrel length without cutting conductor strands.
3. Insert the conductor fully into the correct lug.
4. Select the marked crimp position that matches the cable and lug, then compress the barrel completely.
5. Inspect and pull-test the crimp.
6. Center the correctly sized 3:1 tubing over the barrel transition and apply controlled heat evenly.
7. Allow the completed joint to cool before reconnecting power.

What is the difference between pickled and tinned lugs?

Pickled copper has a cleaned bare-copper finish. Tinned copper adds a protective surface coating. Select the variant required for the installation environment.

Which cable sizes are included?

The 220PCS lug assortment is listed for AWG 8, 6, 4, 2, and 1 cable. The crimper imagery lists marked positions from AWG 8 to 1/0.

How much heat shrink tubing is included?

The live variant name specifies 110PCS of black and red 3:1 heat shrink tubing.