Crimping Tool with Heat Shrink Connectors Set AWG 22-10

Crimping Tool with Heat Shrink Connectors Set AWG 22-10 brings an adjustable ratcheting crimper and compatible heat-shrink terminals together for wire repairs that need both the tool and connectors. Choose the 200-piece butt-connector option for inline splices or the 280-piece mixed wire-connector option for different terminal styles. Each option includes one crimper; the connector quantity depends on the selected option.

Variant Specifications

The table shows the two options currently offered on this product page. The 200PCS and 280PCS quantities refer to connectors, not the number of tools. Match each connector to its marked wire range before crimping.

Applications

For vehicle owners, technicians, and workshop users repairing compatible AWG 22-10 wiring in vehicles, boats, trailers, appliances, and workshop equipment. Use butt connectors for inline wire splices and select the appropriate terminal style for other connections. Use only within the connector manufacturer's electrical, temperature, and environmental ratings. This is not a tool for live circuits, out-of-range conductors, or terminal profiles that do not match its jaws. Moisture protection depends on correct crimping and complete heat shrinking; do not assume suitability for continuous submersion.

How to Choose

Choose the 200PCS Butt Connectors option (HX1218) for repeated inline splices, or the 280PCS Wire Connectors option (HX1223) when the job needs a mixed terminal assortment. Match the conductor and terminal to the marked jaw position: red AWG 22-16, blue AWG 16-14, or yellow AWG 12-10. Check the terminal's own dimensions and crimp requirements; color alone is not a substitute for confirming its specification. This page is for a crimper-and-connectors bundle, not the standalone crimping tool.

How to Use

1. Disconnect power and follow the equipment and connector manufacturers' instructions.
2. Select a compatible connector and strip the conductor to the specified barrel length without cutting strands.
3. Insert the conductor fully, then position the terminal in the matching marked jaw.
4. Complete the ratchet cycle. Inspect the crimp and check wire retention before applying heat; follow the tool instructions if pressure adjustment or quick release is needed.
5. Use a suitable heat source to shrink the sleeve from the center outward until it seals as specified by the connector manufacturer.
6. Allow the connection to cool, then inspect it before restoring power.

FAQ

What is included in each set?
The 200PCS Butt Connectors option includes one crimper and 200 butt connectors (HX1218). The 280PCS Wire Connectors option includes one crimper and 280 mixed terminals (HX1223). These are separate choices, not a combined 480-piece connector pack.

Which wire sizes does the crimper support?
The marked jaw groups are AWG 22-16, AWG 16-14, and AWG 12-10. Match the conductor size, connector specification, and jaw position; do not use a terminal simply because its color looks similar.

Is a heat gun included, and do the terminals still need heating?
No heat gun is listed as included. A suitable heat source is required after crimping to shrink and seal the sleeve. Heating does not replace the mechanical crimp.