Cart
Your cart is empty
Heat shrink wire connectors combine a conductive terminal with heat-activated insulation to create durable, moisture-resistant electrical connections. Compare connector type, wire gauge, pack size, sealing material, and application below, then choose the product that matches your wiring job.
All specifications below are taken from products currently listed in this collection. Pack availability can vary by color and wire gauge.
| Connector Type | AWG | Color | Pack Quantity | Material/Sealing | Application |
|---|---|---|---|---|---|
| Butt Splice | 26-10 | White, Red, Blue, Yellow, Mixed | 50-1000PCS; quantity varies by gauge | Tinned-copper barrel; adhesive-lined 3:1 polyolefin heat shrink | Sealed inline splices for automotive, marine, trailer, and equipment wiring |
| Ring Terminal | 22-10 | Red, Blue, Yellow | 100, 160, 200, 260, or 600PCS | Tinned high-purity copper; 3:1 heat shrink with hot-melt sealant | Battery posts, grounding points, studs, and terminal blocks |
| Spade Terminal | 22-10 | Red, Blue, Yellow | 100, 160, 260, or 460PCS | Tinned high-purity copper; 3:1 heat shrink with hot-melt adhesive | Switches, relays, fuse panels, appliances, and quick-disconnect wiring |
| Fork Terminal | 22-10 | Red, Blue, Yellow | 210PCS mixed kit | Tinned high-purity copper; 3:1 heat shrink with hot-melt sealant | Screw terminals, fuse blocks, relays, and distribution studs |
| Bullet Terminal | 22-10 | Red, Blue, Yellow | 220PCS mixed male/female kit | Pure copper; adhesive-lined 3:1 heat shrink | Quick-disconnect joints for vehicles, boats, motorcycles, and equipment |
Choose the connection shape first, then match the color-coded AWG range to the conductor. Use butt connectors for wire-to-wire splices, ring or fork terminals for studs and screws, and spade or bullet terminals for disconnectable connections.
Strip the wire to the correct length, insert it fully, crimp with the matched die, and pull-test the joint. Apply even heat from the center outward until the tubing shrinks and the adhesive seals around the insulation.
Use these connectors for automotive, marine, trailer, motorcycle, RC, outdoor, and home wiring. Do not use a connector outside its listed AWG range or where the terminal shape does not match the connection point.
Match the connector color and printed AWG range to the conductor: white for AWG 26-24, red for AWG 22-16, blue for AWG 16-14, and yellow for AWG 12-10 where those options are offered.
They create a waterproof or moisture-resistant seal when crimped correctly and heated until the adhesive-lined tubing closes around the wire insulation.
Use a ratcheting crimper with a die matched to heat shrink connectors, followed by a heat gun. A proper mechanical crimp must be completed before heating.
Haisstronica Heat Shrink Wire Connectors
Haisstronica heat shrink connectors are electrical terminals with built-in heat-shrink insulation and sealing support. They are designed for automotive, marine, RC, motorcycle, trailer, and home electrical repairs where the connector itself creates the wire termination and the outer sleeve protects the connection.
Connector vs Tubing: Keep the Difference Clear
Heat shrink connectors include a crimp terminal such as butt, ring, fork, hook, or spade connectors. Heat shrink tubing is protective insulation used around a separate splice or terminal; tubing alone does not create the electrical connection.
Why Choose Heat Shrink Connectors?
These connectors combine crimp strength with heat-activated sealing, helping protect wire terminations from moisture, vibration, abrasion, and strain. Choose them when you need a ready-to-crimp connector with built-in insulation.
Best Applications
Use heat shrink connectors for sealed butt splices, ring terminal connections, spade connections, trailer wiring, boat wiring, automotive harness repairs, and outdoor electrical repairs where a protected terminal is required.
