Haisstronica Lot de 50 cosses à anneau thermorétractables jaunes de qualité marine (3/8"), calibre 12-10, en cuivre rouge étamé, 1 mm, cosses à sertir isolées et brasées

• Live Without Limits: Don't be held back by a humble looking wire connectors. Haisstronica heat shrink connectors are made of tinned copper. The tinning process is designed to effectively prevent copper from being oxidized and reduce resistance. While higher purity copper enhances electrical conductivity.
• Unyielding Protection: Unlike cheap, low-quality connectors, these high-quality thick 3:1 heat shrink tubing of heat shrink connectors won't puncture and break when crimping. After heating, the end penetrates enough hot melt adhesive to form a firm seal. Helps retain the wire in the connector much better than just a standard crimp style.
• Long Term Reliability: The brazed seam with exquisite craftsmanship ensures that the wire is not easy to fall off after crimping, forming a neat and rock-solid crimp. No worries in wire connection.
• Buyer Confidence: We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide customers with quality services and a guarantee for risk-free purchases.

Use these tinned-copper, brazed-seam ring terminals for compatible battery studs, chassis grounds, bus bars, fuse blocks, marine wiring, trailers and automotive accessories. The 3:1 polyolefin sleeve contains hot-melt adhesive that seals around compatible wire insulation after the mechanical crimp passes inspection.

Do not use a ring terminal outside its listed conductor range or on an incompatible stud. Follow the equipment manufacturer’s terminal, current, torque and environmental requirements.

Haisstronica’s heat-shrink terminal rings are designed so the smallest part of your system never holds you back. Each heat shrink ring terminal uses a high-purity, tinned-copper core that resists oxidation, keeps contact surfaces clean, and lowers resistance across the ring electrical connector. Whether you’re landing a wire ring connector on a bus bar, battery post, or chassis stud, these ring wire terminals move current the way it was meant to flow.

Around that copper core, a thick 3:1 polyolefin sleeve turns every crimp into a sealed joint. After your ring terminal crimpers bite down, the tubing shrinks tight and the hot-melt adhesive floods the barrel ends, locking the wire ring terminal in place. The result is a neat, factory-style heat shrink ring connectors finish that grips better than bare crimps or open ring connectors electrical—ideal for marine ring terminals, under-hood wiring, and other high-moisture, high-vibration zones.

Inside each barrel, an expertly brazed seam keeps the lug round and strong while you crimp. That craftsmanship means the conductor strands stay captured even when the ring terminal wire is pulled, flexed, or exposed to heat cycles. From small red ring terminals sizes on sensors to heavy-duty yellow wire ring terminal connectors on starters, you get the same rock-solid mechanical bite and consistent contact on every terminal ring connector.

And because reliability is more than a spec sheet, Haisstronica backs every ring electrical connectors kit with attentive support and a risk-free guarantee. If your wire connector ring or terminal ring ever fails to meet expectations, our team is ready to help with sizing, crimping advice, or replacement—so your projects stay powered, sealed, and confident for the long term.