Wire crimping tool with copper ring terminals and solder seal wire connectors
Haisstronica battery crimping tool: 3-step operation (cut, jaw selection, crimp) for 1/0-8 AWG U.S. battery lugs.
Haisstronica 1 AWG-1/2" M12 battery cable ends, 10PCS with 3:1 dual-wall heat shrink tubing, ROHS/REACH/UL-approved.
Haisstronica 1 AWG heavy-duty terminals, 20PCS kit, 3:1 tubing, compatible with automotive and industrial systems.
Close up of compact ratcheting cable cutter used as a pex a tool on thick red battery cable with ring lug attached
Dimension chart of long handle crimper for pex tubing and battery cable, marking overall length and narrow working head
Haisstronica 1 AWG-1/2" M12 ring battery quick connects, 20PCS, paired with heat shrink tubing for fast installation.

Battery Crimping Tool with 20PCS Wire Lugs

$48.99 USD $50.98 USD
Economisez 4%

A focused starting point for one battery-cable connection size.

Pair the cable-end tool with the lug size your installation calls for.

• Manual hex crimper — rotating positions support the tool’s marked 8–1/0 AWG lug range.
• Targeted lug selection — the supplied connection option is 1 AWG with a 1/2-inch ring opening.
• Cutting and insulation supplies — the cutter and tubing support cable preparation and finishing.

Coupon strip showing 15 percent and 20 percent order discounts
Quantité:
Free Returns Within 30 Days
Free Shipping on All Orders
Warranty up to 24 Months
Visa Mastercard PayPalAmerican Express DiscoverDiners Club

Battery Crimping Tool with 20PCS Wire Lugs combines a heavy-duty hex crimper, cable cutter, twenty 1AWG copper lugs with 1/2-inch (M12) stud holes, and adhesive-lined 3:1 heat shrink for secure battery-cable connections. The tool covers AWG 8 through 1/0, while the included lugs are specifically 1AWG/M12.

Kit Specifications
Included Component Specification Quantity Material / Construction Application
Battery cable lug crimper AWG 8, 6, 4, 2, 1 and 1/0; 15 in long 1 High-hardness carbon steel; EDM-cut hex crimping dies Heavy-gauge copper cable lugs
Cable cutter Maximum cable capacity not published 1 Metal cutting blades Clean cable preparation before stripping
Copper wire lugs 1AWG barrel; 1/2 in (M12) stud hole 20PCS Heavy-wall 99.99% pure copper, as published Battery, inverter, marine, RV and solar power connections
Heat shrink tubing 1/2 in diameter × 1.76 in length; 3:1 ratio Included; separate count not published Red/black dual-wall polyolefin with adhesive lining Insulation, strain relief and moisture sealing

Lug media also publishes an overall lug length of 1.84 in (46.8 mm), palm width of 0.75 in (19.1 mm), and barrel length of 0.63 in (16 mm). Confirm that both the 1AWG barrel and M12 stud hole fit the cable and hardware before installation.

Crimping Die Guide
Die Mark Matching Cable Size Included Lug Match Selection Check
8 8 AWG No Use only with an 8 AWG lug barrel
6 6 AWG No Use only with a 6 AWG lug barrel
4 4 AWG No Use only with a 4 AWG lug barrel
2 2 AWG No Use only with a 2 AWG lug barrel
1 1 AWG Yes — 20PCS, M12 Use this die position for the supplied 1AWG lugs
1/0 1/0 AWG No Use only with a 1/0 AWG lug barrel
Applications

Use this kit for high-current battery leads, power inverters, RV and boat wiring, solar battery banks, golf carts, service vehicles and custom heavy-gauge harnesses. The supplied 1AWG/M12 lugs suit connections that require a 1/2-inch stud hole. The crimper can also handle other AWG 8–1/0 lugs purchased separately when their barrel size matches the selected die.

Do not use the supplied lugs on cable other than 1AWG or on studs other than M12/1/2 inch. Do not use the tool for ferrules, open-barrel terminals or connector profiles not designed for hex cable-lug crimping.

How to Choose
  1. Verify the conductor is 1AWG and the terminal stud is M12 or 1/2 inch before using the supplied lugs.
  2. For replacement lugs, match the lug barrel to the cable gauge and choose the corresponding AWG 8–1/0 die mark.
  3. Check that the lug palm, stud hole and barrel dimensions provide adequate clearance for the battery or bus connection.
  4. Use the supplied 3:1 tubing only when it slides over the lug barrel and can recover tightly around the cable insulation.
How to Crimp and Seal
  1. Disconnect all power and remove jewelry before working on battery cables.
  2. Cut the cable square with the included cutter, then strip only enough insulation for the conductor to fill the lug barrel.
  3. Insert the conductor fully into the 1AWG lug and select the die position marked 1.
  4. Center the barrel in the die, keep fingers clear, and close the handles through a complete crimp.
  5. Inspect the crimp and perform a firm pull test. Reject any lug that rotates, slips or shows damaged strands.
  6. Center the heat shrink over the barrel transition and apply controlled, even heat until the tubing recovers and adhesive appears at the edges. Allow it to cool before loading the cable.
Safety & Compatibility
  • Work only on de-energized circuits and protect battery terminals from accidental short circuits.
  • Wear eye protection and keep hands away from the cutter and crimping jaws.
  • Do not use the tool outside AWG 8–1/0 or substitute an incorrect die position.
  • Use the connection only within the cable, lug, equipment and environmental ratings supplied by the system manufacturer.
Frequently Asked Questions

What cable sizes can the crimping tool handle?

The published die range is AWG 8, 6, 4, 2, 1 and 1/0. Match the die mark to the lug barrel and conductor gauge.

What wire lugs are included?

The kit includes 20PCS copper wire lugs sized for 1AWG cable with a 1/2-inch (M12) stud hole.

Does the kit include heat shrink tubing?

Yes. Product media shows red and black 3:1 dual-wall adhesive-lined tubing sized at 1/2 inch diameter by 1.76 inches long. The separate tubing count is not published.

Can I crimp other lug sizes with this tool?

Yes, the tool supports compatible hex-crimp cable lugs from AWG 8 to 1/0, but only 1AWG/M12 lugs are supplied in this bundle. Purchase the correct lug size separately and match it to the die.

How do I know the crimp is secure?

The conductor should be fully seated, the barrel should show a centered hex compression, and the lug should pass a firm pull test without slipping or rotating.

Browse battery and cable crimping tools, compare copper cable lug and ring terminal kits, and review the crimping tool selection guide. For service parts, see the 20PCS battery cable lug kit and browse adhesive-lined heat shrink tubing.

  • Enjoy free shipping on all orders.
  • Delivery Time: 1-2 business days to The US and Canada. Delivery times may vary depending on your location and carrier conditions.
  • Details
  • Tracking: After your order is shipped, you will receive an email with a tracking number to monitor the delivery status.
  • Need Help? Contact our support team for assistance with shipping or your order.
  • 30-Day Returns
    You may request a return within 30 calendar days of delivery. Items must be unused, in their original condition, and include all original packaging and accessories.
  • Damaged, Defective, or Incorrect Items
    Contact us with your order number and photos. If the issue is due to our error, we will cover reasonable return shipping costs or provide an appropriate replacement.
  • Refunds
    Approved refunds are issued to your original payment method within 5 business days after inspection. Your bank may require additional processing time.
  • To start a return, email support@haisstronica.com with your order number and reason for return. Please obtain approval before sending anything back.
  • View Full Return & Refund Policy

More Information About This Item
Close-up of insulated wire connectors joining red, blue, and yellow wires

BIENVENUE AU CLUB HAISSTRONICA !

Abonnez-vous pour bénéficier de 5 % de réduction supplémentaire sur votre première commande

Livraison gratuite

Livraison gratuite sur toutes les commandes