Cart
Your cart is empty
Connector & crimp tool accessories help you replace worn dies and quick-change jaws without buying a complete crimper. Compare terminal type, supported AWG, crimp profile, tool compatibility, and included parts below.
| Terminal Type | Supported AWG | Die/Crimp Profile | Ratchet/Adjustment | Included Parts |
|---|---|---|---|---|
| Wire terminals — Die A / HX1576 | Approx. AWG 23-10 | Interchangeable terminal profile; match the connector specification | Fits HS-8327 ratcheting crimping tool; no adjustment stated on the die | 1 die + 2 fixing screws |
| Multi-terminal — Die B / HX1577 | Approx. AWG 23-10 | Interchangeable multi-terminal profile | Fits HS-8327 ratcheting crimping tool; no adjustment stated on the die | 1 die + 2 fixing screws |
| Open / non-insulated — Die C / HX1578 | Approx. AWG 23-14 | Open / non-insulated terminal profile | Fits HS-8327 ratcheting crimping tool; no adjustment stated on the die | 1 die + 2 fixing screws |
| Heavy-duty cable terminals — Die D / HX1579 | Approx. AWG 10-6 | Heavy-duty cable-terminal profile | Fits HS-8327 ratcheting crimping tool; no adjustment stated on the die | 1 die + 2 fixing screws |
| Wire terminals — Die E / HX1580 | Approx. AWG 20-10 | Interchangeable terminal profile | Fits HS-8327 ratcheting crimping tool; no adjustment stated on the die | 1 die + 2 fixing screws |
| Wire terminals — Die F / HX1581 | Approx. AWG 14-10 | Interchangeable terminal profile | Fits HS-8327 ratcheting crimping tool; no adjustment stated on the die | 1 die + 2 fixing screws |
| Heat-shrink / insulated terminals — H1 | AWG 22-10 | Color-coded insulated-terminal jaw | Tool-free jaw swap; fits Haisstronica 9-inch quick-change tool | 1 selected jaw |
| Wire ferrules — H2 | AWG 24-8 | Ferrule profile, 0.25-10 mm² | Tool-free jaw swap; fits Haisstronica 9-inch quick-change tool | 1 selected jaw |
| Solar connectors — H3 | AWG 14-10 | Solar profile, 2.5 / 4 / 6 mm² | Tool-free jaw swap; fits Haisstronica 9-inch quick-change tool | 1 selected jaw |
| Non-insulated terminals — H4 | AWG 22-8 | Non-insulated profile, 0.5-10 mm² | Tool-free jaw swap; fits Haisstronica 9-inch quick-change tool | 1 selected jaw |
| Insulated PVC terminals — H5 | AWG 22-10 | Color-coded insulated-terminal profile | Tool-free jaw swap; fits Haisstronica 9-inch quick-change tool | 1 selected jaw |
| Open-barrel terminals — H6 | AWG 20-10 | Open-barrel profile, 0.5-6 mm² | Tool-free jaw swap; fits Haisstronica 9-inch quick-change tool | 1 selected jaw |
Start with terminal type and AWG, then select the matching A-F die or H1-H6 jaw profile. Confirm the connector specification before crimping.
Compatibility checkA-F dies fit the HS-8327 ratcheting crimping tool; H1-H6 jaws fit the Haisstronica 9-inch quick-change tool.
Install the selected die or jaw fully, verify the AWG range, make a test crimp, and inspect the terminal before production work.
Secure fitHS-8327 dies use the included fixing screws. Quick-change jaws use a tool-free swap and lock into the compatible handle.
Each A-F die option includes one die and two fixing screws. Each H1-H6 option is sold as the selected replacement jaw.
Not universalDo not choose by appearance alone; unsupported tools, terminal families, or wire gauges are not suitable.
